top of page

The compact SkyRC ITP380 infrared thermometer is used for safe and contactless measurement of the temperature of special surfaces such as engines, chargers or complete vehicles. Compared to its predecessor, SkyRC relies on a classic TO-46 thermopile sensor. The sensor element, consisting of 116 small thermocouples with an active surface of 545 µm diameter on a silicon chip, absorbs the energy and thus generates the output signal. Depending on the surface, the measured value may differ despite the same temperature. To adjust this, the thermometer can be adjusted to precisely these different surfaces for a more accurate result.

 

Material Surface Emissivity coefficient

Anodized Aluminum 0.77

Plastics 0.91

Hard gloss rubber plates 0.94

Carbon filled pressing area 0.98

Characteristics:

Wide measuring range from -40°C (-40°F) to 380°C (716°F)

Highly accurate and fast infrared sensor

Four measurement methods: Quick Mode / Scan Mode / Max. Value / Min. Value

Measuring unit in Celsius or Fahrenheit

The emissivity coefficient can be adjusted

The large LCD screen can display the temperature, emissivity coefficient and battery capacity

Equipped with backlight for better readability of the values

The device has a low energy consumption

Automatic shutdown after 1 minute to extend battery life

4 Different measurement methods:

There are 4 measurement methods. First, point the sensor on the top of the measuring device directly at the object to be measured and do one of the following:

 

Quick Mode: Press the "MEASURE" button once to measure the current temperature and display it on the screen.

Scan Mode: Bring the aluminum hood as close to the object as possible. Press and hold the "MEASURE" button to continuously measure the temperature. The screen will continue to update the temperature. After releasing the "MEASURE" button, the last measured temperature is displayed.

Maximum temperature mode: Point the aluminum hood at the object to be measured, press the "Mode" button once and press and hold the "MEASURE" button. The thermometer shows the highest or maximum temperature measured.

Minimum temperature mode: Point the aluminum hood at the object to be measured, press the "Mode" button twice and press and hold the "MEASURE" button. The thermometer displays the coolest or minimum temperature measured.

Technical specifications:

Operating voltage: 2x AAA battery (Not included)

Working current: up to 40mA @ 3V

Operating temperature: 0-50°C

Power consumption: up to 25ua @ 3V

Adjustable infrared emission frequency range: 0.01-1

Precision: -40°C - 0°C (+/- 1.5°C)

0°C - 380°C (+/- 1.5°C)

-40°F - 32°F (+/- 3°F)

32°F - 716°F (+/- 3°F)

Weight: 75g

Dimensions: 121 x 40 x 39.6mm

380P infrared Thermometer

Artikelnummer: SK-500037-02
49,96 €Preis
    RC Monkey Parts Shop
    bottom of page